GTM91120CC-30VV-P2 Potted/Encapsulated in plastic housing ITE / Medical Power Supply Datasheet

Request Information Download PDF Configure Output Connector

Information

Model Number

GTM91120CC-30VV-P2

Description

GTM91120CC-30VV-P2, ITE / Medical Power Supply, Potted/Encapsulated in plastic housing, Regulated Switchmode AC-DC Power Supply AC Adaptor, , Input Rating: 100-240V~, 50-60 Hz, See "Blade/Cord Installed" section, Output Rating: 30 Watts, Power rating with convection cooling (W) , 5-48V in 0.1V increments, Approvals: CB EN/IEC 60335-1; CE; ETL; CB 60335;

Agency Documents

http://www.globtek.info/certs/GTM91120-P2%20-P3/

CE EC-Declaration for Medical

https://globtek.secure.force.com/models/ec_declaration?id=a0Oa000000HWY4KEAX

CE EC-Declaration for Industrial/Commercial/ITE

https://globtek.secure.force.com/models/ec_declaration?id=a0Oa000000HWY4KEAX

CE EC-Declaration for Household

Contact GlobTek for more information

RoHS/RoHS3 Declaration

https://www.globtek.com/pdf/rohs_cert/a0Oa000000HWY4KEAX

REACH Declaration

https://www.globtek.com/pdf/iso_certificates/REACH.pdf

Conflict Minerals Declaration

https://www.globtek.com/pdf/conflict-minerals.pdf

Model Parameters

Type

Potted/Encapsulated in plastic housing / 塑胶外壳内部灌胶密封

Technology

Regulated Switchmode AC-DC Power Supply AC Adaptor / 开关整流电源

Category

ITE / Medical Power Supply / 通信/医疗电源

Input Voltage Range (V)

100-240V~, 50-60 Hz

Max Input Current (A)

1.5A

Max Output Power Rating (W)

Output Voltage Range (V)

5-48

Efficiency

Ingress Protection

IP68

Size (mm)

102*46*37

Enclosure

Rating Table

Model Number (Final ordering #/Part No to be defined)	Voltage	Amps (A)	Watts (W)
GTM91120CC-3007.5-2.5-P2*	5	4	20
GTM91120CC-3007.5-1.5-P2*	6	3.75	22.5
GTM91120CC-3010.5-1.5-P2*	9	2.77	24.93
GTM91120CC-3014.5-2.5-P2*	12	2.5	30
GTM91120CC-3019.5-4.5-P2*	15	2	30
GTM91120CC-3019.5-1.5-P2*	18	1.66	29.88
GTM91120CC-3024-P2*	24	1.25	30
GTM91120CC-3036-P2*	36	0.83	29.88
GTM91120CC-3048-P2*	48	0.625	30

* (Final ordering #/Part No to be defined)

Specifications

A) ELECTRICAL SPECIFICATIONS:
1. Input Voltage: 100-240 Vac
2. Input Frequency: 47 - 63 Hz
3. Output power (rated): 15Watts max, Constant Current
4. Output Regulation: +/- 5% measured at the output connector
5. Line Voltage Regulation: +/- 2% typical measured at full load
6. Output Ripple (Vp-p): +/-2% maximum, measured at 20 MHz bandwidth with 0.1 uf ceramic capacitor in parallel with 10 uf electrolytic capacitor connected at the end of the output connector at nominal line
7. Turn-ON/OFF Overshoot: 5% maximum, 500uS typical recovery time for 25% to 50% step load
8. Turn-ON Delay: 3 Seconds, maximum @ full load, nominal line
9. Hold-Up Time: 5mS typical @ nominal input voltage and full load
10. Inrush Current: 60A maximum cold start @ 240Vac input
11. Switching Frequency: 100 KHz typical

B) PROTECTION
1. Over-Voltage: Protected with a Zener diode clamp across the output
2. Short Circuit: Hiccup with auto recovery
3. Over-load: Hiccup with auto recovery
4. Input Protection: Input line and neutral fusing

C) SAFETY
1. Dielectric Withstand Voltage: 5656Vdc from primary to secondary
2. Earth Leakage Current: <100 uA at 240Vac input voltage

D) OTHER:
1. MTBF: 200,000 Hours @ 25°C ambient temperature
2. Operating Temperature: 0°C to 40°C ambient temperature
3. Humidity: 0% to 90% relative humidity
4. Storage Temperature: -10°C to 80°C
5. Cooling: Convection
6. For EMI suppression 28A026-0A2 Snap-on Ferrites are recommended on both input and output cables, if required.

E) ENCLOSURE
1. Housing: High impact plastic, 94V0 polycarbonate, non-vented
2. Size: 43.5 x 74.0 x 35.3 mm +/-1.0 mm
3. Markings: Label and/or Pad Printed and/or Molded in the case

Derating Curve

Qty (ea.)/Carton

Individual Box/Gift Box Size (mm)

Individual Box/Gift Box Color

Master Carton Size (mm)

TBD

Gross Weight (kg)

Label Width (mm)

Label Height (mm)

Input Configuration

Description

See "Blade/Cord Installed" section

Output Configuration

Common output connector options:
Click to add to your request.


L Type (Coaxial 5.5x2.5mm plug)	C Type (Coaxial 5.5x2.1mm plug)	K Type (Coaxial 3.5x1.3mm plug)	LL Type (5.5x2.5mm Locking 760k type)	CL Type (5.5x2.1mm Locking S761k type)	Magnetic Connector

YL3 Type (KPPX-3P)	YL4 Type (KPPX-4P)	EJ1/2/3/4/5 (EIAJ RC-5320A type connectors)	MSB Type (Micro USB)	Inquire for custom design

For a comprehensive list of options, click here

Contact GlobTek for your specific requirements or custom solutions.

Approvals

Logo	Description
No Logo Applicable	IEC 60335-1:2010 (Fifth Edition) incl. Corr. 1:2010 and Corr. 2:2011 + A1:2013
No Logo Applicable	CB to 60335-1 5th Edition (Safety of Household and Similar Electrical Appliances, Part 1: General Requirements) CB Report/ Certificate IEC 60335-1:2010 Up to 36 volts only
	CE Mark: tested to comply with EN 55032:2012+AC:2013, EN 61000-3-2:2014, EN 61000-3-3:2013, EN 55024:2010, EN 60601-1-2:2015
	AAMI ES60601-1:2005 +A1 - Medical Electrical Equipment - Part 1: General Requirements CAN/CSA-C22.2 No.60601-1:14, Third Edition Issued: 2014/03/01 - Medical Electrical Equipment - Part 1 IEC 60601-1-11 Issued: 2015/01/20 Ed. 2 Medical Elec. Equip.