90W Desktop Power Supply Adapter offering IEC60950, 60601, 62368, UL1310, IEC60335 Certifications and DOE EPS 2.0 Level VI compliant, Class I, as well as LPS
Information
Model Number
GTM96900P90VV.V-T3
Description
GTM96900P90VV.V-T3, ITE / Medical Power Supply/Class 2/Household Power Supply, 60601-1-4th Ed. , Desktop/External, Regulated Switchmode AC-DC Power Supply AC Adaptor, , Input Rating: 100-240V~, 50-60Hz, IEC 60320/C14 AC Inlet Connector, Class I, Earth Ground, Output Rating: 90 Watts, 12-54V in 0.1V increments, Approvals: RCM LPS CCC Patent US9838207B2 VCCI EAC IP41 Option cETLus cETLus cETLus CB ETL ETL CB S-Mark CB ETL CB S-Mark CE China RoHS Class I Level VI RoHS Ukraine WEEE PSE PSE PSE
Regulated Switchmode AC-DC Power Supply AC Adaptor / 开关整流电源
Category
ITE / Medical Power Supply/Class 2/Household Power Supply / 通信/医疗电源/II 类/家用电源
Input Voltage Range (V)
100-240V~, 50-60Hz
Max Input Current (A)
1.5A
Max Output Power Rating (W)
90
Output Voltage Range (V)
12-54
Efficiency
VI
Ingress Protection
IP41
Size (mm)
149.3 x 62.8 x 34.0 +/-1.0
Enclosure
Rating Table
Preferred ratings shown below. Custom output voltages available in 0.1V increment from the minimum voltage listed to the maximum voltage listed; contact sales.
Model Number (Final ordering #/Part No to be defined)
Voltage
Amps (A)
Watts (W)
LPS
RFQ
GTM96900P8512-T3*
12
7.1
85.2
N
GTM96900P9015-T3*
15
6
90
N
GTM96900P9019-T3*
19
4.73
89.87
N
GTM96900P9024-T3*
24
3.75
90
N
GTM96900P9036-T3*
36
2.5
90
N
GTM96900P9048-T3*
48
1.875
90
N
GTM96900P9054-T3*
54
1.66
89.64
N
GTM96900P8512-T3Z*
12
7.1
85.2
Y
GTM96900P9015-T3Z*
15
6
90
Y
GTM96900P9019-T3Z*
19
4.73
89.87
Y
GTM96900P9024-T3Z*
24
3.75
90
Y
GTM96900P9036-T3Z*
36
2.5
90
Y
GTM96900P9048-T3Z*
48
1.875
90
Y
GTM96900P9054-T3Z*
54
1.66
89.64
Y
GTM96900P90VV.V-T3-XXXX
CUSTOM
CUSTOM
CUSTOM
CUSTOM
* (Final ordering #/Part No to be defined)
Specifications
A) ELECTRICAL SPECIFICATIONS: 01. Input Voltage: Specified 90-264 Vac, Nameplate rated: 100-240Vac 90-264Vac range @ 100% of rated load current 85-264 Vac range @ 90% of rated load current 90-370 VDC range @ 100% of rated load current 02. Input Frequency: Specified 47-63 Hz, Nameplate rated 50/60Hz 03. Power Factor: 0.90 minimum @ 230Vac, 0.97 minimum @ 115Vac 04. Output Type: LPS (Limited Power Source), limited to less than 8A and 100W 04. Output Regulation: +/- 4% measured at the output connector 05. Line Voltage Regulation: +/- 0.5% typical measured at full load 06. Green Power On Indicator LED 07. Output Ripple (Vp-p): 1% or 200 mV whichever is greater, measured at 20 MHz bandwidth with 0.1 uf ceramic capacitor in parallel with a low impedance 47 uf electrolytic capacitor connected at the end of the output connector at nominal line 08. Turn-ON/OFF Overshoot: 5% maximum, 1 mS typical recovery time for 25% to 50% step load 09. Turn-ON Delay: 1 second typical 10. Hold-Up Time: 20 mS minimum 11. Inrush Current: 30A maximum at 115Vac input and 60A maximum at 230 Vac input 12. Switching Frequency: Varies from 25KHz to 125KHz 13. Efficiency: Compliant with Efficiency Level VI Standard and 230 CoC Tier 2 Limits 14. No Load Standby Power: <0.15 W @ 230Vac
B) PROTECTION 01. Input Protection: Input line fusing and 300Vac rated MOV 02. Non-LPS version: Current Limited to 110% to 160% of rated output current 03. LPS version: Short Circuit/Overload limited to less than 8A and 100W (add Z suffix in model #) 04. Over-Temperature : Inherently protected against continuous overload at high temperature 05. Output Over-Voltage: 110% to 135% of nominal output voltage under full load condition, and less than 60V max. Latching protection, cycle AC OFF to reset.
C) SAFETY 01. Dielectric Withstand Voltage: 4000Vac or 5656Vdc from input to output, On Class I models, 3000Vac or 4242Vdc from input to earth 02. Earth Leakage Current: Class I models < 300uA, N/A for Class II models 03. Touch Current: Class I models < 20uA, Class II models < 70uA 04. Output Isolation Options: a) C8 or C18 Inlet, Class II b) C6 or C14 Inlet, Class II FE, Output Isolated from Earth contact c) C6 or C14 Inlet, Class I, Output negative directly attached to Earth contact 05. Earth Continuity Test: < 0.1 Ohm between Earth Pin at AC input and PCB termination point (Class I models only) 06. Means of Protection: 2 x MOPP 07. Primary to Secondary Bridging Capacitance: Two IEC60384-14 certified Y1 type capacitors in series 08. Compliant Standards: See listings at end of this drawing for specifics
D) EMC EN 60601-1-2, 4th edition Emissions, per EN 55032, EN 61000-6-3, EN 61000-6-4 Conducted Emissions: Class B, FCC Part 15, Class B Radiated Emissions: Class B, FCC Part 15, Class B Line Frequency Harmonics EN61000-3-2, Class A Voltage Fluctuations/Flicker EN61000-3-3
Immunity, per EN 55024, EN 61000-6-1, EN 61000-6-2 Static Discharge Immunity EN61000-4-2, 10kV Contact Discharge, 18kV air discharge Radiated RF Immunity EN61000-4-3, 10V/m 80-1000MHz, 3V/m 1-2.7GHz, 80% 1KHz AM. EFT/Burst Immunity EN61000-4-4, 4kV/100kHz. Line Surge Immunity EN61000-4-5, 2kV differential, 4kV common-mode Conducted RF Immunity EN61000-4-6, 3Vrms, 80% 1KHz AM Power Frequency Magnetic Field Immunity EN61000-4-8, 3A/m Voltage Dip Immunity EN61000-4-11, Criteria
E) OTHER: 01. MTBF: 500,000 Hours @ 40°C ambient temperature, Full Load 02. Operating Temperature: GTM96900P Family: 0°C to 50°C ambient temperature with full load Regarding Operating Temperature, a- See below derating table for output power capability at alternate temperature b- Extended low end temperature range available as custom option 03. Humidity: 0% to 95% relative humidity, non-condensing 04. Storage Temperature: -30°C to 80°C 05. Cooling: Convection 06. ROHS: Compliant with latest regulations, see approvals section below 07. Operational Altitude: 5000M
F) DESKTOP STYLE ENCLOSURE 01. Housing: High impact plastic, 94V0 polycarbonate, non-vented 02. Size: 149.4 x 62.6 x 33.5 +/-1.0 mm 03. Markings: Label or Laser printed 04. AC Input mechanical options: Desktop C6, C8, C14 or C18 IEC Inlet.
G) SPECIAL OPTIONS 01. LPS or non-LPS versions (Z suffix for LPS model) 02. Custom Cordsets, various cordage types, and connector types 03. Custom Markings 04. Short term Output Surge Capability, as a non-LPS version 05. Reduced Leakage Current version, medical CF leakage current compliance 06. Tightened output voltage tolerance 07. Reduced Output Ripple Level 08. Reduced output power Marking/Rating 09. LED Lighting, Class C Line Harmonics per 61000-3-2 Three Power Ranges available: 27-50W, 40-65W and 57-90W 10. High Rel PCB laminate with Plated through Holes for IPC610 Class 2 Compliance 11. Low Temperature operation, down to -40°C 12. Special Housing Colors and Cordset Colors 13. Epoxy Potted Version, “P2” or “P3” suffix, with flying wires
H) OUTPUT CONNECTORS Several output connector options are available with various output current ratings. GlobTek can supply 10A rated 2.1mm and 2.5mm style DC Power Jacks, to complement our 10A output rated 2.1mm and 2.5mm DC power plugs used on our output cordsets. Please visit https://en.globtek.com/news/high-current-coaxial-barrel-plug-jacks-for-high-wattage-power-supplies for a real time product offering of mating connectors.
Derating Curve
Qty (ea.)/Carton
20
Individual Box/Gift Box Size (mm)
Egg Crate
Individual Box/Gift Box Color
Master Carton Size (mm)
427 x 405 x 158
Gross Weight (kg)
15.6
Label Width (mm)
50.0
Label Height (mm)
110.0
Input Configuration
Description
IEC 60320/C14 AC Inlet Connector, Class I, Earth Ground Mates with IEC 60320/C13 Plug
Optional Locking IEC60320 Receptable and cord option available on some models by request.:
Below are standard cordsets which are "not included" (unless stated above); these can be purchased separately or packaged with the power supply. Contact your Sales Engineer if the style required is not shown below. Many more available in different lengths, colors or cable material.
Contact GlobTek for your specific requirements or custom solutions.
Approvals
Logo
Description
No Logo Applicable
CB for IEC 60601-1:2006/A1:2013+A12:2014
IEC 60601-1-11:2015
No Logo Applicable
CB for IEC 60335-1:2010 (Fifth Edition) incl. Corr. 1:2010 and Corr. 2:2011 + A1:2013
No Logo Applicable
CB for IEC 60950-1:2005 (Second Edition) + Am 1:2009 + Am 2:2013
No Logo Applicable
CB for IEC 62368-1:2014 (Second Edition)
CCC Altitude up to 5000 m
GB17625.1-2012, GB4943.1-2011, GB/T9254-2008
Test standard:
EN 55032: 2012+AC: 2013
EN 61000-3-2:2014
EN 61000-3-3:2013
EN 55024:2010
EN 60601-1-2:2015
CHINA SJ/T 11364-2014, China RoHS Chart: http://en.globtek.com/globtek-rohs.php
Conforms to AAMI STD.ES60601-1,IEC 60601-1-11 Certified to CAN/CSA STD.C22.2 NO.60601-1
Conforms to AAMI STD.ES60601-1,IEC 60601-1-11
Certified to CAN/CSA STD.C22.2 NO.60601-1
Conforms to UL STD. 1310 Certified to CSA STD. C22.2 NO.223
Conforms to UL STD. 1310
Certified to CSA STD. C22.2 NO.223
Conforms to UL STD. 60950-1 Certified to CSA STD C22.2 NO.60950-1
Conforms to UL STD. 60950-1
Certified to CSA STD C22.2 NO.60950-1
Declaration # ЕАЭС N RU Д-US.АД75.В.01052 Custom Union of Russia, Belarus and Kazakhstan http://www.globtek.com/redirect/?loc=gost-certificate-eac-declaration
Medical Electrical Equipment - Part 1: General Requirements For Basic Safety And Essential Performance
(R2012) [AAMI ES60601-1:2005 +C1;A2] [CSA C22.2#60601-1:2014 Ed.3]
[AAMI HA60601-1-11:2015 Ed.2]
Information Technology Equipment Safety Part 1: General Requirements >Valid without technical revision:
01Jan2022< [UL 60950-1:2007 Ed.2 +R:14Oct2014]
Class 2 Power Unit
Class 2 Power Units [UL 1310:2011 Ed.6 +R:12Dec2014] up to 5A
Power Supplies With Extra-Low Voltage Class 2 Outputs [CSA C22.2 No.223:2015 Ed.3]
Indoor Use Only - Mark is on the label or Molded in the case
IP41
Ingress Protection: IP41 to IEC60529:2001 Protection against
granular foreign bodies - Protected against vertically falling drops of water
JAPAN TUV R-PSE, Cert. No. JD 50313287, to J60950-1(H26) , J55022(H22),J3000(H25)[15V or less]. Please reference the following website for guidelines on PSE regulations: http://en.globtek.com/importing-ite-and-medical-power-supplies-ac-adaptors-to-japan/
JAPAN TUV R-PSE, Cert. No. JD 50314475, to J60950-1(H26) , J55022(H22),J3000(H25)[DC15≤30V]. Please reference the following website for guidelines on PSE regulations: http://en.globtek.com/importing-ite-and-medical-power-supplies-ac-adaptors-to-japan/
JAPAN TUV R-PSE, Cert. No. JD 50314475, to J60950-1(H26) , J55022(H22),J3000(H25)[DC30≤60V]. Please reference the following website for guidelines on PSE regulations: http://en.globtek.com/importing-ite-and-medical-power-supplies-ac-adaptors-to-japan/
Efficiency: complies to section 301 of Energy Independence and Security Act (EISA) complies with Energy Star tier 2 (North America), ECP tier 2 (China), MEPS tier 2 (Australia), Code of Conduct (Europe)
LPS
Limited Power Source if Z suffix on model number
Patent pending
Patent pending
RCM certificate SAA-170646-EA; Australia and New Zealand Regulatory Compliance, Mark (http://rcm.standards.org.au/rcmfaq/rcmfaq.htm)
RoHS
Specifications of directive 2011/65/EU Annex VI (ROHS-2) with amendment 2015/863-EU (ROHS-3) http://www.ce-mark.com/Rohs%20final.pdf
S-Mark Certificate
EN 60601-1:2006 + A1:2013 + A12:2014
EN 60601-1-11:2015
(http://www.intertek.com/marks/s/)
GTM96900P90VV.V-T3
中文 (Chinese)
Deutsch
English (Canada)
English (UK)
English (US)
Español
Finnish
Français
Italiano
Norsk
Polish (język polski)
Russian (русский)
Svenska
Türkçe
ελληνικά (Greek)
日本語 (Japanese)
한국의 (Korean)
Português