World map 中文 (Chinese)

Interchangeable input plugs for wall plug in AC DC Adapters, also known as blades or multiplugs, provide OEMs a large advantage in their power architecture with a large efficiency in logistics and system packaging. Aside from the simplicity in the wall plug in adapter minimizing wires and cables, this solution provides the OEM a single wall plug in AC DC power supply, with single regulatory testing and singular system level EMC design while providing a global solution for system marketing and export. This provides an option for the OEM to have a single SKU for the wall plug in ac dc power supply adapter. GlobTek's Q series of wall plug in AC DC adapters provides the company's largest offering of interchangeable blades options for wall plug in adapters with 14 options. In addition, they match wall plug in power supplies from 6-40W, with Information and Communication Technology (ICT) (IEC62368-1), Information Technology Equipment (IEC60950-1), Medical (60601-1), UL 1310, and Household Use (IEC60335-1). GlobTek AC DC wall plug in adapters typically provide North American (UL, ETL), European (CE), Russian (EAC), Ukraine, Japan (PSE), China (CCC), and Australian/New Zealand (RCM) Certifications as standard providing customers instant access to global markets without upfront costs.

名称/NameDescriptionImageData
2 COND: H03VVH2-F 18AWGX3C8-4X7, Stripped & Tinned2 COND: H03VVH2-F 18AWGX3C8-4X7, Stripped & Tinned

2 COND: Round, IEC 60227 H03VVH2-F 2x0.75mm ROJ, Stripped & Tinned2 COND: Round, IEC 60227 H03VVH2-F 2x0.75mm ROJ, Stripped & Tinned

2 Pole 5.0MM Pitch UL94V-0 Rated Terminal Block2 Pole 5.0MM Pitch UL94V-0 Rated Terminal Block, Color may vary.2 Pole 5.0MM Pitch UL94V-0 Rated Terminal Block

5 Pin Pitch 2.54 mmPin 1: N/C, Pin 2,3:-V, Pin 4,5: +V
Australia 2 ProngAustralian AS 3112 configuration: SAA 2 pins Class IIAustralia 2 Prong

Used in AustraliaNew ZealandFijiPapua New Guinea and Tokelau, has two flat pins forming an inverted V-shape. These flat blades measure 6.3 by 1.5 mm with the Active and Neutral pins of 17 mm in length set 30° to the vertical on a nominal pitch of 13.7 mm. A standard power outlet in Australia provides a nominal voltage of 230 volts at a maximum of 10 amps and always includes an earth connection. As in the UK, its outlets are individually switched for extra safety. Argentina uses a similar plug, with pins 1 mm longer.

 


BRAZILIAN PLUG, 2 PIN WITHOUT GROUNDThe Brazilian NBR 14136:2002 is standard for Brazilian plugs and receptacle

This standard is based on the international IEC 60906-1 standard, developed to encourage countries to adopt one plug and receptacle for global use. The  standard does not include a medical grade plug. Brazil uses 110-220 Volts and 60 Hz.

China 2 ProngChina GR 2099 configuration: 2 pins, Class IIChina 2 Prong

The standard for Chinese plugs and sockets is set out in GB 2099.1‐2008 and GB 1002‐2008. As part of China's commitment for entry into the WTO, the new CPCS (Compulsory Product Certification System) has been introduced, and compliant Chinese plugs have been awarded the CCC Mark by this system. The plug is two conductor, non-earthed, rated at 10 A, 250 V and used for Class II applications. The Australian plug fits, though the pins on the Chinese plug are thinner and 1 mm (0.039 in) longer. China also uses American/Japanese NEMA 1‐15 sockets and plugs for Class-II appliances. The voltage at a Chinese socket of any type is 220.

 


EU Fixed 2 BladesEurope Blades Class II, (2) ConductorsEU Fixed 2 Blades

EURO (SCHUKO) PLUG CEE 7/4, 2 PRONGS W/GROUNDEURO (SCHUKO) PLUG CEE 7/4, 2 PRONGS W/GROUND
EUROPEAN "SCHUKO" CEE 7/7 PLUG, 2 POLE-3 WIRE GROUNDINGEUROPEAN "SCHUKO" CEE 7/7 PLUG, 2 POLE-3 WIRE GROUNDINGEUROPEAN


Europlug 2 Prong CEE 7/7European CEE 7/16 configuration:EN 50075 Europlug 2 PINEuroplug 2 Prong CEE 7/7
The prongs of the Europlug are 19 mm long. They consist of a 9 mm long conductive tip of 4 mm diameter with a rounded ending, followed by a 10 mm long flexible insulated shaft of not more than 3.8 mm diameter. The two prongs are not exactly parallel and converge slightly; their centres are 19 mm apart at the tip and 18.6 mm apart at the base. The elasticity of the converging prongs provides sufficient contact force for the Europlug's current rating with a variety of socket-hole arrangements. The entire plug is 35.3 mm wide and 13.7 mm high, and must not exceed these dimensions within 18 mm behind its front plane (this allows for the recesses on many European socket types). The left and right side of the plug are formed by surfaces that are at 45° relative to the horizontal plan.

F-Blades (Interchangeable)Blade Options for F- Series Wall Plug-in Power SuppliesF-Blades (Interchangeable)

INPUT CONNECTOR: F-Socket (below are available blades configurations which are "not included" (unless stated above); can be purchased separately, package with power supply or as a separate "F-KIT" if specified

01. United States / Canada / Japan  NEMA 1-15P configuration: NA 2 blades, Class II; US/CA/JP P/N: F-NA(R)
02. European CEE 7/16 configuration: Europlug 2 pins, Class II; EU P/N: F-EU(R)
03. UK BS 1363 configuration: UK 3 blade with dummy Ground, Class II; GB P/N: F-UK(R)
04. Australian AS 3112 configuration: SAA 2 blade, Class II; AU P/N: F-SAA(R)
05.  Brazilian NBR6147 configuration: 2 pins, Class II;SIMILAR TO IEC TYPE C BR P/N: F-BR(R)

F-KIT: 1,2,3,4,5 above
 

FC-NA-3C-S/T-2M3 CONDUCTOR, SVT 18/3, BLACK, 2 METER, ROJ 31MM, RIJ 13MMFC-NA-3C-S/T-2M
G-Blades (Interchangeable)Blade Options for G- Series Wall Plug-in Power SuppliesG-Blades (Interchangeable)



INPUT CONNECTOR: G-Socket (below are available blades configurations which are "not included" (unless stated above); can be purchased separately, package with power supply or as a separate "G-KIT" if specified

01. United States / Canada / Japan  NEMA 1-15P configuration: NA 2 blades, Class II; US/CA/JP P/N: G-NA(R)
02. European CEE 7/16 configuration: Europlug 2 pins, Class II; EU P/N: G-EU(R)
03. UK BS 1363 configuration: UK 3 blade with dummy Ground, Class II; GB P/N: G-UK(R)
04. Australian AS 3112 configuration: SAA 2 blade, Class II; AU P/N: G-SAA(R)


 

G-Blades White C-62 (Interchangeable)Blade Options for G- Series Wall Plug-in Power Supplies, Color White C-62G-Blades White C-62 (Interchangeable)



INPUT CONNECTOR: G-Socket (below are available blades configurations which are "not included" (unless stated above); can be purchased separately, package with power supply or as a separate "G-KIT" if specified

01. United States / Canada / Japan  NEMA 1-15P configuration: NA 2 blades, Class II; US/CA/JP P/N: G-NA(RW),Color White C-62
02. European CEE 7/16 configuration: Europlug 2 pins, Class II; EU P/N: G-EU(RW),Color White C-62
03. UK BS 1363 configuration: UK 3 blade with dummy Ground, Class II; GB P/N: G-UK(RW),Color White C-62
04. Australian AS 3112 configuration: SAA 2 blade, Class II; AU P/N: G-SAA(RW), Color White C-62


 

H Blades (Interchangeable)Blade Options for H Series Wall Plug-in Power SuppliesH Blades (Interchangeable)
Data Sheet: http://en.globtek.com/interchangeable-blades.php
Insertion Instructions: http://www.globtek.com/pdf/Instructions-Interchangeable-Blades.pdf
Video: H-Blade Style Instruction Video

INPUT CONNECTOR: H-Socket (below are available blades configurations which are "not included" (unless stated above); can be purchased separately, package with power supply or as a separate "H-KIT" if specified

01. United States / Canada / Japan  NEMA 1-15P configuration: NA 2 blades, Class II; US/CA/JP P/N: H-NA(R)
02. Australian AS 3112 configuration: SAA 2 blade, Class II; AU P/N: H-SAA(R)
03. UK BS 1363 configuration: UK 3 blade with dummy Ground, Class II; GB P/N: H-UK(R)
04. European CEE 7/16 configuration: Europlug 2 pins, Class II; EU P/N: H-EU(R)
05. Korean KS C8305 configuration: 2 pins, Class II; KR P/N: H-KR(R)
06. China GB 2099 configuration: 2 blades, Class II; CN P/N:H-CN(R)
Kits
01. H-KIT: 1,2,3,4 above
02. H-KIT-INTL: 2,3,4 above
03. H-KIT-5: 1,2,3,4,5 above
04. H-KIT-6: 1,2,3,4,5 and 6 above

Indian 2 pins plugIS 1293 India, 2 Blade Ground Class II
Class II plugs are rated at 2.5 and 6 amps
Indian plug 2 pinsThe Indian uses 230 Volts, 50 Hz alternating current as the power source
Class II plugs are rated at 2.5 and 6 amps
Input Wires 1.0mm²x3C stranded Line:Brown, Neutral:Blue, Ground: Green/YellowInput Wires 1.0mm²x3C stranded Line:Brown, Neutral:Blue, Ground: Green/YellowInput Wires 1.0mm²x3C stranded  Line:Brown, Neutral:Blue, Ground: Green/Yellow


Input Wires 2x 150 mm stranded UL1015 or equivalent, Blue=Neutral and Brown=LineInput Wires 2x 150 mm stranded UL1015 or equivalent, Blue=Neutral and Brown=Line, Endings stripped 7 +/-1 mm, not tinned, with ferrules (non-insulated type)
Input Wires 2x 150mm stranded UL1015 or equivalent, White=Neutral and Black=LineInput Wires 2x 150mm stranded UL1015 or equivalent, White=Neutral and Black=Line
Input Wires 2x 200mm stranded UL1015 or equivalent, White=Neutral and Black=LineInput Wires 2x 200mm stranded UL1015 or equivalent, White=Neutral and Black=Line

Input Wires 2x 305mm stranded UL1015 or equivalent, White=Neutral and Black=LineInput Wires 2x 305mm stranded UL1015 or equivalent, White=Neutral and Black=LineInput Wires 2x 305mm stranded UL1015 or equivalent, White=Neutral and Black=Line


Wire gauge (AWG): 18 AWG
Input Wires 3x 305mm stranded UL1015 or equivalent, Ground: Green/YellowInput Wires 3 x 305mm stranded UL1015 or equivalent, White=Neutral and Black=Line, Ground: Green/YellowInput Wires 3x 305mm stranded UL1015 or equivalent, Ground: Green/Yellow

Wire gauge (AWG): 18 AWG
Input Wires 85 and 95 mm stranded UL1015, Blue=Neutral and Brown=LineInput Wires 85 and 95 mm stranded UL1015 or equivalent, Blue=Neutral and Brown=Line
J Blades (Interchangeable)Blade Options for J Series Wall Plug-in Power SuppliesJ Blades (Interchangeable)
Data Sheet: http://en.globtek.com/interchangeable-blades.php
Insertion Instructions: http://www.globtek.com/pdf/Instructions-Interchangeable-Blades.pdf
Video: J-Blade Style Instruction Video





 

INPUT CONNECTOR: J-Socket (below are available blades configurations which are "not included" (unless stated above); can be purchased separately, package with power supply or as a separate "J-KIT" if specified

01. United States / Canada / Japan  NEMA 1-15P configuration: NA 2 blades, Class II; US/CA/JP P/N: J-NA(R)
02. Australian AS 3112 configuration: SAA 2 blade, Class II; AU P/N: J-SAA(R)
03. UK BS 1363 configuration: UK 3 blade with dummy Ground, Class II; GB P/N: J-UK(R)
04. European CEE 7/16 configuration: Europlug 2 pins, Class II; EU P/N: J-EU(R)
05. Korean KS C8305 configuration: 2 pins, Class II; KR P/N: J-KR(R)
06. China GB 2099 configuration: 2 blades, Class II; CN P/N:J-CN(R)

Kits

01. J-KIT: 1,2,3,4 above
02. J-KIT-INTL: 2,3,4 above
03. J-KIT-5: 1,2,3,4,5 above
04. J-KIT-6: 1,2,3,4,5 and 6 above

JIS 8303/2ProngsJIS 8303, Class II ,2 ConductorsJIS 8303/2Prongs

JST B2P3-VHJST B2P3-VH

Optional Input Wiring Kits are available:
PN/Ordering NoLengthEnd AEnd B
C810070M6VAR2(R)60IEC 60320 C8JST VAR-2
C1410070M6VAR2(R)60IEC 60320 C13JST VAR-2
VAR2210070M7VAR2(R)73JST VAR-2JST VAR-2
Custom lengths, construction, cable types, ferrites, filters, and termination available upon request.
JST B3P-VH3 Pin connector Mating Housing: JST VHR-3N or equivalent Mating Contact: JST SVH-21T-P1.1 or equivalentJST B3P-VH
JST B5P-VH3 Pin connector Mating Housing: JST VHR-3N or equivalent Mating Contact: JST SVH-21T-P1.1 or equivalent
Korean plugEuropean CEE 7/16 configuration: Europlug 2 PINKorean plug
The prongs of the Europlug are 19 mm long. They consist of a 9 mm long conductive tip of 4 mm diameter with a rounded ending, followed by a 10 mm long flexible insulated shaft of not more than 3.8 mm diameter. The two prongs are not exactly parallel and converge slightly; their centres are 19 mm apart at the tip and 18.6 mm apart at the base. The elasticity of the converging prongs provides sufficient contact force for the Europlug's current rating with a variety of socket-hole arrangements. The entire plug is 35.3 mm wide and 13.7 mm high, and must not exceed these dimensions within 18 mm behind its front plane (this allows for the recesses on many European socket types). The left and right side of the plug are formed by surfaces that are at 45° relative to the horizontal plan.

Lead Wire 305mm, 2* 18 AWG 1 conductor, UL 1015, solid, Black & White, 305 +/-5Lead Wire 305mm, 2* 18 AWG 1 conductor, UL 1015, solid, Black & White, 305 +/-5Lead Wire 305mm, 2* 18 AWG 1 conductor, UL 1015, solid, Black & White, 305 +/-5

Lead Wire 305mm, 2* 18 AWG 1 conductor, UL 1015, solid, Black & White, no SRLead Wire 305mm, 2* 18 AWG 1 conductor, UL 1015, solid, Black & White, 305 +/-5 without strain reliefLead Wire 305mm, 2* 18 AWG 1 conductor, UL 1015, solid, Black & White, no SR

Lead Wire, see Blades/Cord Included for descriptionLead Wire, see Blades/Cord Included for descriptionLead Wire, see Blades/Cord Included for description

Lead Wire: 203mm, UL1517, 18AWG, with plug: 8 mm.Lead Wire: 203mm, UL1517, 18AWG, with plug: 8 mm.Lead Wire: 203mm, UL1517, 18AWG,  with plug: 8 mm.

Male Cigarette Lighter PlugMale Cigarette Lighter Plug
Male Cigarette Lighter Plug,UL 1185 ,16AWG ,1220 mmMale Cigarette Lighter Plug,UL 1185 ,16AWG ,1220 mm

Male Cigarette Lighter Plug,UL 1185 ,18AWG ,1830 mmMale Cigarette Lighter Plug,UL 1185 ,18AWG ,1830 mm for GTDP61200-120VVMale Cigarette Lighter Plug,UL 1185 ,18AWG ,1830 mm
Male Cigarette Lighter Plug,UL 1185 ,18AWG ,1830 mmMale Cigarette Lighter Plug,UL 1185 ,18AWG ,1830 mmMale Cigarette Lighter Plug,UL 1185 ,18AWG ,1830 mm
Male Cigarette Lighter Plug,UL 1185 ,18AWG ,610 mmMale Cigarette Lighter Plug,UL 1185 ,18AWG ,610 mmMale Cigarette Lighter Plug,UL 1185 ,18AWG ,610 mm
Male Cigarette Lighter Plug,UL2468, 16AWG, 1800mmMale Cigarette Lighter Plug,UL2468, 16AWG, 1800mmMale Cigarette Lighter Plug,UL2468, 16AWG, 1800mm

MOLEX 2 Pin AC ConnectorMOLEX 2 Pin AC Connector GTM91099MOLEX 2 Pin AC Connector

NA Fixed 2 BladesNorth America Blades Class II, (2) ConductorsNA Fixed 2 Blades

NA Fixed 3 BladesNorth America Blades with Ground Prong, Class I, (3) ConductorsNA Fixed 3 Blades

NEMA 1-15PNEMA 1-15P, North America Blades, Class II 2 Conductors
All NEMA 1 devices are two-wire non-grounding devices (hot-neutral) rated for 125 V maximum. NEMA 1-15P plugs have two parallel flat blades, 0.25 inches (6.35 mm) wide, 0.06 inches (1.524 mm) thick, 0.625-0.718 inches (15.875–18.256 mm) long, and spaced 0.5 inches (12.7 mm) apart.
NEMA 5-15PNorth America Blades with Ground Prong, Class I, (3) Conductors
NEMA 6-20P3 prong LT-262B or YP16L 20A/250VNEMA 6-20P



Connector Standard NEMA 6-20P up angle 3P plug Maximum Current rating 20A Maximum Voltage 250V Number of Poles and Wires 2 poles, 3 wires Available Wire Thickness 12 through 18AWG Outer Mold Material 35P PVC Blade Material Nickel coated Brass Flamability Rating UL 94V-0 color black is standard but any color available  
Q Blades (Interchangeable)Blade Options for Q Series Wall Plug-in Power SuppliesQ Blades (Interchangeable)
Data Sheet: http://en.globtek.com/interchangeable-blades.php
Insertion Instructions: http://www.globtek.com/pdf/Instructions-Interchangeable-Blades.pdf
Video: Q-Blade Style Instruction Video


 

INPUT CONNECTOR: Q-Socket (below are available blades configurations which are "not included" (unless stated above); can be purchased separately, package with power supply or as a separate "Q-KIT" if specified

01. United States / Canada / Japan  NEMA 1-15P/ IEC PLUG Type A [WORKS IN PLUG B] configuration: NA 2 blades, Class II; US/CA/JP P/N: Q-NA(R)
02. Australian AS 3112 configuration: SAA 2 blade/ IEC TYPE I, Class II; AU P/N: Q-SAA(R)
03. UK BS 1363 configuration: UK 3 blade with dummy Ground/ IEC TYPE G, Class II; GB P/N: Q-UK(R)
04. European CEE 7/16 configuration: Europlug 2 pins/ IEC TYPE C [WORKS IN TYPE E&F], Class II; EU P/N: Q-EU(R)
05. Korean KS C8305 configuration: 2 pins/SIMILAR TO IEC TYPE C, Class II; KR P/N: Q-KR(R)
06. Argentina IRAM 2073 configuration: 2 blades/SIMILAR TO IEC TYPE I; AR P/N: Class II Q-AR(R)
07. China GB 2099 configuration: 2 blades/SIMILAR TO TYPE A, Class II; CN P/N:Q-CN(R)
08. India IS 1293 6A/BS546 configuration: 5A, 3 pins with Dummy Ground, Class II/IEC TYPE D; IN P/N: Q-IN(R)
09. IEC60320/C18 Inlet, Class II; P/N: Q-C18(R)
10. Brazilian NBR6147 configuration: 2 pins, Class II;SIMILAR TO IEC TYPE C BR P/N: Q-BR(R)
11. South Africa SABS164-1, 3 round prongs, Class II + dummy ground, IEC TYPE M P/N: Q-SANS164-1-16A(R)
12. South Africa SABS164-4, 3 round prongs with a notched prong @ 0º, Class II + dummy ground, IEC TYPE M Red, P/N:
Q-SANS164-4L-16A(R)
13. South Africa SABS164-4, 3 round prongs with a notched prong @ -53º, Class II + dummy ground, Blue, IEC TYPE M, P/N:
Q-SANS164-4C-16A(R)
14. South Africa SABS164-4, 3 round prongs with a notched prong @ +53º, Class II + dummy ground, Black,IEC TYPE M P/N:
Q-SANS164-4R-16A(R)

Kits

01. Q-KIT: 1,2,3,4 above
02. Q-KIT-INTL: 2,3,4 above
03. Q-KIT-6: 1,2,3,4,5,6 above
04. Q-KIT-7: 1,2,3,4,5,6,7 above
05. Q-KIT-8: 1,2,3,4,5,6,7,8 above

RJ45
Solder Pins 2 * 0.64mm Diameter, 10mm LongSolder Pins for Line & Neutral, 0.64 mm square pins, 10 mm long

Solder Pins 2 * 1.14mm Diameter, 11.43mm LongSolder Pins for Line and Neutral, 1.14 mm square pins, 11.43 mm long
Solder Pins 2 * 1.4mm Diameter, 4.5mm LongSolder Pins for Line & Neutral, 1.4 mm square pins, 4.5 mm long

Solder Pins 2 * Ø0.64mm, 9 mm Long, 12 mm Center to Center between PinsSolder Pins for Line & Neutral, 0.64 mm square pins, 9 mm long

Solder Pins 2 * Ø1.05 mm, 3.5 mm Long, 20 mm Center to Center between PinsSolder Pins 2 * Ø1.05 mm, 3.5 mm Long, 20 mm Center to Center between Pins
Solder pins 2, Center to Center 17.5mm, ?1.1mm x 3.5mm length
Solder Pins 3 * 1.4mm Diameter, 4.5mm LongSolder Pins for Line,Neutral and Ground, 1.4 mm square pins, 4.5 mm long
South Africa Fixed BladeSouth Africa uses 230 Volts, 50 Hz alternating current as the power source
Class II plugs are rated at a maximum of 16A
T2 Inlet (IEC 60320/C8)IEC 60320/C8 AC Inlet connector, Class II, Non-Earth Ground (aka "Figure-8")T2 Inlet (IEC 60320/C8)

Mates with IEC 60320/C7 Plug

Below are standard cordsets which are "not included" (unless stated above); these may be purchased separately or packaged with the power supply. Please contact your Sales Engineer if the style required is not shown below. Many more available in different lengths, colors or cable material.

Standard International IEC 320/C7 Cordsets
2094112M703(R)Argentina (Type I)IRAM 2063IEC 320/C720007
5014112M703A(R)Australian (Type I)AS 3112IEC 320/C720007
207B4111M8703(R)Brazil (Type N)NBR14136IEC 320/C718006
4533501M8703(R)China (Type A)GB 2099.1IEC 320/C718306
2074112M703A(R)European (Type C)CEE 7/16IEC 320/C720007
2084111M8703(R)India (Type M)BS 546IEC 320/C718006
451J3401M8703(R)Japan (Type A)JIS 8303IEC 320/C718306
2044112M703A(R)Korea (Type C)KS C8305IEC 320/C720007
4511116F703A(R)N. American (Type A)NEMA 1-15PIEC 320/C718306
4033401M8703A(R)Taiwan (Type A)CNS690IEC 320/C718306
6104112M703A(R)UK, Hong Kong, Singapore, Gulf States (Type G)BS1363IEC 320/C720007
T2/R2 Inlet R Series (IEC 60320/C8 or Interchangeable)IEC 60320/C8 AC Inlet connectorT2/R2 Inlet R Series (IEC 60320/C8 or Interchangeable)
Blade Insertion Instructions
R-Blade Style Instruction Video


Mates with IEC 60320/C8 Plug

This series of Interchangeable Blade products may be used with Proprietary Interchangeable Blades as described below or with standard international power cords.
  Optional INPUT BLADES: R-Socket: below are available blades configurations which are "not included" (unless stated above); may be purchased separately, packaged with power supply, or as a separate "R-KIT" if specified  1. Class II model NEMA 1-15P AC power plug with 2 prongs, R-NA-2(R)  2. Australian AS 3112 configuration: SAA 2 pins Class II, R-SAA-2(R)  3. UK BS 1363 configuration: UK 2 pins (dummy Ground) Class II, R-UK-2(R)  4. European CEE 7/16 configuration: Europlug 2 PINS, Class II, R-EU-2(R) 
5. China GB 2099 configuration: 2 blades, Class II; CN P/N:R-CN-2(R)
6. Desktop Insert
Kits
05. R-KIT-2(R): 1,2,3,4 above
06. R-KIT-2-INTL(R): 2,3,4 above


Standard Cordsets
Below are standard cordsets which are "not included" (unless stated above); these may be purchased separately or packaged with the power supply. Contact your Sales Engineer if the style required is not shown below. Many more available in different lengths, colors or cable material.

Standard International IEC 320/C7 Cordsets
 
Part NumberCountryPlugConnectorLength (mm)Length (feet)
2094112M703(R)Argentina (Type I)IRAM 2063IEC 320/C720007
5014112M703A(R)Australian (Type I)AS 3112IEC 320/C720007
207B4111M8703(R)Brazil (Type N)NBR14136IEC 320/C718006
4533501M8703(R)China (Type A)GB 2099.1IEC 320/C718306
2074112M703A(R)European (Type C)CEE 7/16IEC 320/C720007
2084111M8703(R)India (Type M)BS 546IEC 320/C718006
451J3401M8703(R)Japan (Type A)JIS 8303IEC 320/C718306
2044112M703A(R)Korea (Type C)KS C8305IEC 320/C720007
4511116F703A(R)N. American (Type A)NEMA 1-15PIEC 320/C718306
4033401M8703A(R)Taiwan (Type A)CNS690IEC 320/C718306
6104112M703A(R)UK, Hong Kong, Singapore, Gulf States (Type G)BS1363IEC 320/C720007
T2A Inlet (IEC 60320/C18)IEC 60320/C18 AC Inlet connector, Class II, Non-Earth GroundT2A Inlet (IEC 60320/C18)

Mates with IEC 60320/C17 Plug

 

      
Standard International IEC 320/C17 Cordsets    
      
Below are standard cordsets which are "not included" (unless stated above); these may be purchased separately or packaged with the power supply. Please contact your Sales Engineer if the style required is not shown below. Many more available in different lengths, colors or cable material.
      
Part Number/ LinkCountryPlugTerminationLength (mm)Length (Ft)
209A4062M071(R)Argentina (Type I)IRAM 2063IEC320/C1720006.6
5014112M071A(R)Australia (Type I) AS3112IEC 320/C1720006
204B4062M071(R)Brazil (Type N)NRR 14136IEC320/C1720006.6
4533502M071A(R)China (Type A)GB 2099.1IEC320/C1720006.6
2074232M071C(R)Europe (2.5A, Type C)CEE 7/7IEC 320/C1720006.6
489C4232M071A(R)Europe (10A)CEE 7/17IEC320/C1720006.6
208A41111M8071A(R)India (Type D) IS 1293 IEC 320/C1718006
451J3322M071A(R)Japan (Type A)JIS 8303IEC320/C1720006.6
401P1086F071A(R)           401P1086F071C(R)North America (Type A)NEMA 1-15PIEC 320/C1718286
401P1219F71ANorth America (Type A)NEMA 1-15PIEC 320/C1727439
4033321M8071(R)Taiwan (Type A)CNS10917IEC 320/C1718006
6104232M071A(R)UK, Hong Kong, Singapore, Gulf States (Type G)BS1363 (Fuse 3A)IEC 320/C1720006.6
T3 Inlet (IEC 60320/C14)IEC 60320/C14 AC Inlet Connector, Class I, Earth GroundT3 Inlet (IEC 60320/C14)

Mates with IEC 60320/C13 Plug

Optional Locking IEC60320 Receptable and cord option available on some models by request.:


Standard International IEC 320/C13 Cordsets

Below are standard cordsets which are "not included" (unless stated above); these can be purchased separately or packaged with the power supply. Contact your Sales Engineer if the style required is not shown below. Many more available in different lengths, colors or cable material.

  Stock Power Supply Cords
Part Number/ LinkCountryPlugTerminationLength (mm)(Ft)
3021457F701(R)N. American (Type B)NEMA 5-15PIEC 320/C1321507
1191068F0701(R)N. American (Type B)NEMA 5-15P HospitalIEC 320/C1324598
2194272M5701-T(R)Argentina (Type I)IRAM 2073IEC 320/C1325008
5502022M5701A(R)Australian (Type I)AS3112 / 3 PRONGIEC 320/C1325008
204B4272M5701(R)Brazil (Type N)BRAZILIEC 320/C1325008
6023602M5701(R)China (Type I)CCC GR2099IEC 320/C1325008
G8014272M5701(R)Danish (Type K)AFSNIT SECTION 107-2-D1IEC 320/C1325008
23144272M5701-T(R)Europe (Type E)CEE 7/7IEC 320/C1325008
205IN4272M5701(R)                India (Type D)India IS 1293 (also known as IA16A3 or BS546)IEC 320/C1325008
208IN4272M5701(R)India (Type M)India IS 1293 (also known as IA16A3 or BS546)IEC320/C1325008
377C4272M5701(R)Israel (Type H)ISL 377CIEC 320/C1325008
23024272M5701(R)Italy (Type L)CEI 23-16/VIIIEC 320/C1325008
3003339F701(R)
[3x1.25mm2]

3003068F2701-HK(R) 
[3 x 2.0mm2]
Japan (Type B)JIS 8303 / 3 PINSIEC 320/C1325008
302J115J6F0701J(R)Japan / North America (Type B – 12A)JIS 8303 / 3 PINS and NEMA 5-15P (PSE and UL/CUL appr)IEC 320/C1318306
302J104J6F0701J(R)Japan / North America (Type B – 15A)JIS 8303 / 3 PINS and NEMA 5-15P (PSE and UL/CUL appr)IEC 320/C1318306
2313K3432M5701(R)Korea (Type F)KS C 8305IEC 320/C1325008
5804272M5701(R)Russia (Type F)GOST 7396IEC 320/C1325008
2084272M5701(R)South Africa (Type M)South Africa SABS164-1 (16A type)IEC 320/C1325008
23214272M5701(R)Switzerland (Type J)SEV 1011IEC 320/C1325008
3003322M5701(R)Taiwan (Type B)BSMIIEC 320/C1325008
PZ0800100-2M5BK13H(RUK, Hong Kong,Singapore, Gulf States (Type G)BS 1363AIEC 320/C1325008
7055002M5701A(R)InternationalIEC 320 C14-C13IEC 320/C1325008
T3 Inlet (IEC 60320/C14), Class II with functional earthIEC 60320/C14 AC Inlet Connector, Class II with functional earthT3 Inlet (IEC 60320/C14), Class II with functional earth

Mates with IEC 60320/C13 Plug

Standard International IEC 320/C13 Cordsets
Below are standard cordsets which are "not included" (unless stated above); these can be purchased separately or packaged with the power supply. Contact your Sales Engineer if the style required is not shown below. Many more available in different lengths, colors or cable material.
 
Part Number/ LinkCountryPlugTerminationLength (mm)(Ft)
3021457F701(R)N. American (Type B)NEMA 5-15PIEC 320/C1321507
1191068F0701(R)N. American (Type B)NEMA 5-15P HospitalIEC 320/C1324598
2194272M5701-T(R)Argentina (Type I)IRAM 2073IEC 320/C1325008
5502022M5701A(R)Australian (Type I)AS3112 / 3 PRONGIEC 320/C1325008
204B4272M5701(R)Brazil (Type N)BRAZILIEC 320/C1325008
6023602M5701(R)China (Type I)CCC GR2099IEC 320/C1325008
G8014272M5701(R)Danish (Type K)AFSNIT SECTION 107-2-D1IEC 320/C1325008
23144272M5701-T(R)Europe (Type E)CEE 7/7IEC 320/C1325008
205IN4272M5701(R)                India (Type D)India IS 1293 (also known as IA16A3 or BS546)IEC 320/C1325008
208IN4272M5701(R)India (Type M)India IS 1293 (also known as IA16A3 or BS546)IEC320/C1325008
377C4272M5701(R)Israel (Type H)ISL 377CIEC 320/C1325008
23024272M5701(R)Italy (Type L)CEI 23-16/VIIIEC 320/C1325008
3003339F701(R)
[3x1.25mm2]

3003068F2701-HK(R) 
[3 x 2.0mm2]
Japan (Type B)JIS 8303 / 3 PINSIEC 320/C1325008
302J115J6F0701J(R)Japan / North America (Type B – 12A)JIS 8303 / 3 PINS and NEMA 5-15P (PSE and UL/CUL appr)IEC 320/C1318306
302J104J6F0701J(R)Japan / North America (Type B – 15A)JIS 8303 / 3 PINS and NEMA 5-15P (PSE and UL/CUL appr)IEC 320/C1318306
2313K3432M5701(R)Korea (Type F)KS C 8305IEC 320/C1325008
5804272M5701(R)Russia (Type F)GOST 7396IEC 320/C1325008
2084272M5701(R)South Africa (Type M)South Africa SABS164-1 (16A type)IEC 320/C1325008
23214272M5701(R)Switzerland (Type J)SEV 1011IEC 320/C1325008
3003322M5701(R)Taiwan (Type B)BSMIIEC 320/C1325008
PZ0800100-2M5BK13H(RUK, Hong Kong,Singapore, Gulf States (Type G)BS 1363AIEC 320/C1325008
7055002M5701A(R)InternationalIEC 320 C14-C13IEC 320/C1325008
T3A Inlet (IEC 60320/C6)IEC 60320/C6 AC Inlet Connector, Class I, Earth Ground ( aka "Mickey Mouse")T3A Inlet (IEC 60320/C6)

Mates with IEC 60320/C5 Plug

 
 Standard International IEC 320/C5 Cordsets

Below are standard cordsets which are "not included" (unless stated above); these can be purchased separately or package with the power supply. Contact your Sales Engineer if the style required is not shown below. Many more available in different lengths, colors or cable material. 

Part Number / LinkCountryPlugConnectorLength (mm)Length (ft)
3021066F712(R)N. American (Type B)NEMA 5-15PIEC 320/C518806
1191068F0712(R)N. American (Type B)NEMA 5-15P HospitalIEC 320/C524598
2194262M0712(R)Argentina (Type I)IRAM 2073IEC320/C520506.7
2064262M0712(R)Australian (Type I)AS3112 / 3 PRONGIEC 320/C520006.6
204B4262M0712(R)Brazil (Type N)BRAZILIEC 320/C520006.6
6023592M5712(R)China (Type I)CCC GR2099IEC 320/C525008
23144262M0712(R)Europe (Type E)CEE 7/7IEC 320/C520506.6
2313K3432M0712(R)Korea (Type F)KS C 8305IEC 320/C520006.6
205IN4262M0712(R)India (Type D)India IS 1293 (also known
as IA16A3 or BS546)
IEC320/C520006.6
377C4262M0712(R)Israel (Type H)ISLIEC320/C520506.7
23024262M0712(R)Italy (Type L)CEI 23-16/VIIIEC 320/C520006.6
3003316F0712(R)Japan (Type B)JIS 8303 / 3 PINSIEC 320/C518306
3021066F0712ULPSE(R)Japan / USA (Type B)JIS 8303 / 3 PINS +
NEMA 5-15P
IEC 320/C518306
2054262M0712(R)S. Africa (Type D)South Africa SABS164-1   (6A type plug)IEC320/C520506.7
2084262M0712(R)S.Africa (Type M)South Africa SABS164-1 (16A type plug)IEC 320/C520006.6
23214262M0712(R)Switzerland (Type J)SEV 1011 ( EL 203)IEC 320/C520006.6
3003316F0712(R)Taiwan (Type B)BSMIIEC 320/C520006.6
6104262M0712(R)UK, Hong Kong, Singapore, Gulf States (Type G)BS1363IEC 320/C520006.6
T3A Inlet R Series (IEC 60320/C6 / Interchangeable Blade)IEC 60320/C6 AC Inlet Connector, Class I, Earth Ground ( aka "Mickey Mouse")T3A Inlet R Series (IEC 60320/C6 / Interchangeable Blade)
Blade Insertion Instructions
R-Blade Style Instruction Video

Mates with IEC 60320/C5 Plug
This series of Interchangeable Blade products may be used with Proprietary Interchangeable Blades as described below or with standard international power cords.                                                                                 

Optional INPUT BLADES: R-Socket: below are available blades configurations which are "not included" (unless stated above); may be purchased separately, packaged with power supply, or as a separate "R-KIT" if specified
 
1. Class I model NEMA 5-15P, Class I AC power plug with 2 blades & ground pin, R-NA-3(R)
2. Australian AS 3112 configuration: SAA 3 pins Class I, R-SAA-3(R)
3. UK BS 1363 configuration: UK 3 pins (Ground) Class I, R-UK-3(R)
4. European CEE 7/7 configuration: European plug 2 PINS + ground, Class I, R-EU-3(R)
5. Desktop Insert
Kits
05. R-KIT-3(R) 1,2,3,4 above
06. R-KIT-3-INTL(R): 2,3,4 above 


Below are standard cordsets which are "not included" (unless stated above); these can be purchased separately or package with the power supply. Contact your Sales Engineer if the style required is not shown below. Many more available in different lengths, colors or cable material. 

           Standard International IEC 320/C5 Cordsets

 

Part Number / LinkCountryPlugConnectorLength (mm)Length (ft)
3021066F712(R)N. American (Type B)NEMA 5-15PIEC 320/C518806
1191068F0712(R)N. American (Type B)NEMA 5-15P HospitalIEC 320/C524598
2194262M0712(R)Argentina (Type I)IRAM 2073IEC320/C520506.7
2064262M0712(R)Australian (Type I)AS3112 / 3 PRONGIEC 320/C520006.6
204B4262M0712(R)Brazil (Type N)BRAZILIEC 320/C520006.6
6023592M5712(R)China (Type I)CCC GR2099IEC 320/C525008
23144262M0712(R)Europe (Type E)CEE 7/7IEC 320/C520506.6
2313K3432M0712(R)Korea (Type F)KS C 8305IEC 320/C520006.6
205IN4262M0712(R)India (Type D)India IS 1293 (also known as IA16A3 or BS546)IEC320/C520006.6
377C4262M0712(R)Israel (Type H)ISLIEC320/C520506.7
23024262M0712(R)Italy (Type L)CEI 23-16/VIIIEC 320/C520006.6
3003316F0712(R)Japan (Type B)JIS 8303 / 3 PINSIEC 320/C518306
3021066F0712ULPSE(R)Japan / USA (Type B)JIS 8303 / 3 PINS + NEMA 5-15PIEC 320/C518306
2054262M0712(R)S. Africa (Type D)South Africa SABS164-1   (6A type plug)IEC320/C520506.7
2084262M0712(R)S.Africa (Type M)South Africa SABS164-1 (16A type plug)IEC 320/C520006.6
23214262M0712(R)Switzerland (Type J)SEV 1011 ( EL 203)IEC 320/C520006.6
3003316F0712(R)Taiwan (Type B)BSMIIEC 320/C520006.6
6104262M0712(R)UK, Hong Kong, Singapore, Gulf States (Type G)BS1363IEC 320/C520006.6

 

Terminal BlockTerminal Block
Terminal Block for GT-T104P500Terminal BlockTerminal Block for GT-T104P500
Terminal Block-33 Positon Terminal Block
Shanghai Elinker P/N: LG103-5.0
Terminal Block-3 screws3 Positon Terminal Block

Optional Input Wiring Kits are available:
 
PN/Ordering NoLengthEnd AEnd B
C810070M6MLX5(R)60IEC 60320 C8 (Faston)MOLEX 09-50-3051
C810070M6MLX5HW(R)60IEC 60320 C8 (Hardwired)MOLEX 09-50-3051
C1410070M6MLX5(R)60IEC 60320 C13MOLEX 09-50-3051
MLX5410070M7MLX5(R73MOLEX 09-50-3051MOLEX 09-50-3051
Custom lengths, construction, cable types, ferrites, filters, and termination available upon request.
 
Terminal Block-44 Positon Terminal Block
Terminal Block-77 Positon Terminal Block
Tyco P/N 206060-1 or equivalentCircular Connector TYCO 206060-1


 
Tyco P/N 640445-3 or equivalent with pin 2 removedPCB AC input connector to be Tyco P/N 640445-3 or equivalent with pin 2 removed. Mates with Tyco IDC type 3-640426-3 harness connector.Tyco P/N 640445-3 or equivalent with pin 2 removed
Tyco P/N 640445-3 or equivalent with pin 2 removed w/ PCB Ground LugPCB AC input connector to be Tyco P/N 640445-3 or equivalent with pin 2 removed. Mates with Tyco IDC type 3-640426-3 harness connector; w/ PCB Ground LugTyco P/N 640445-3 or equivalent with pin 2 removed w/ PCB Ground Lug
UK 2 Blade BS 1363UK BS 1363 configuration: UK 2 Blades Class I
UK Fixed 2 Blade w/Dummy Ground Class IIUK BS 1363, 2 Blade w/Dummy Ground Class IIUK Fixed  2 Blade w/Dummy Ground Class II

The line and neutral pins have a rectangular cross section 6.35 mm by 4.0 mm, 17.7 mm long and with centres 22.2 mm apart. The protective-earth pin is a rectangular cross section 8.0 mm by 4.0 mm, 22.3 mm long and with a centre line 22.2 mm from the line/neutral pin centre line. The dimensions were originally specified in decimal inches with asymmetric tolerances and redefined as minimum and maximum metric dimensions in BS 1363:1984.

Dimensions are chosen to provide safe clearance to live parts. The distance from any part of the line and neutral pins to the periphery of the plug base must be not less than 9.5 mm. This ensures that nothing can be inserted alongside a pin when the plug is in use, and helps keep fingers away from the pins. The minimum insertion distance from the face of the socket-outlet to the first point of contact with a live part is 9.6 mm.

The "Dummy" longer earth pin ensures that the earth path is connected before the live pins, and remains connected after the live pins are removed. The earth pin is too large to be inserted into the line or neutral sockets by mistake.

UK Fixed 3 BladesUK BS 1363, (3) Blade Class IUK Fixed 3 Blades

The line and neutral pins have a rectangular cross section 6.35 mm by 4.0 mm, 17.7 mm long and with centres 22.2 mm apart. The protective-earth pin is a rectangular cross section 8.0 mm by 4.0 mm, 22.3 mm long and with a centre line 22.2 mm from the line/neutral pin centre line. The dimensions were originally specified in decimal inches with asymmetric tolerances and redefined as minimum and maximum metric dimensions in BS 1363:1984.

Dimensions are chosen to provide safe clearance to live parts. The distance from any part of the line and neutral pins to the periphery of the plug base must be not less than 9.5 mm. This ensures that nothing can be inserted alongside a pin when the plug is in use, and helps keep fingers away from the pins. The minimum insertion distance from the face of the socket-outlet to the first point of contact with a live part is 9.6 mm.

The longer earth pin ensures that the earth path is connected before the live pins, and remains connected after the live pins are removed. The earth pin is too large to be inserted into the line or neutral sockets by mistake.


Various InputIEC320 C14, C8, C6, C18

Various Input CordsetsSee "Blade/Cord Installed" section. Contact GlobTek for customization requests such as Molded country plugs, Molex or TE connectors, or IEC connectors mounted on any type of cable in any customer specified lengths.

Various Input WiresContact GlobTek for customization requests on any type of cable in any customer specified lengths.
WAGO P/N 734-132WAGO P/N: 734-132 (MCS-MINI SERIES 734 MALE 2 PINS)
Call
Email
💬
Text
💁
Chat
?
询价
我们可以帮助您?
我们可以帮助您?